PARLEE PATIENT WRAP
Preferred and trusted by emergency medical service professionals.
The Parlee Patient Wrap System is constructed of rugged 400d nylon to provide years of service. It is highly adjustable to fit various patient sizes. Four independent polyester hollofill insulation cores allow for efficient temperature regulation in changing conditions. Carry handles are sewn through to create a maximum carry capacity of 1000 lbs. Additional features include a detachable hood, circuit holders, document pouch, and retention clips for keeping unit rolled when not in use.
Colour: Red/Black
Sizes: Adult: 198 cm x 89 cm (78 in x 35 in) (without hood)
Pediatrics: 135 cm x 58 cm (53 in x 23 in) (without hood)
Adult and Pediatrics Disposable Liner Sheets sold separately
Colour: Red/Black
Sizes: Adult: 198 cm x 89 cm (78 in x 35 in) (without hood)
Pediatrics: 135 cm x 58 cm (53 in x 23 in) (without hood)
Adult and Pediatrics Disposable Liner Sheets sold separately
- Highly adjustable to fit various patient sizes.
- 4 independent polyester hollofill insulation cores allow for efficient temperature regulation in changing conditions.
- 2 options for storage-rolled full width or rolled half width
- Replaceable/removable Reflective Strips
- Maximum carry capacity of 1000 lbs.
- Detachable hood
- Circuit holders
- Document pouch
- Replaceable/removable badge holder
- Retention clips for keeping unit rolled when not in use
- Top & bottom layers made with water repellent material
- Carry handles to move patient
CONTENTS
1-Detachable hood
2-Removable/replaceable Reflective Strips
1-Removable/replaceable Badge Holder
2-Top layer insulation cores with white binding
2-Bottom layer insulation cores with black binding
8-Velcro strips to attach and secure core layers
1-Detachable hood
2-Removable/replaceable Reflective Strips
1-Removable/replaceable Badge Holder
2-Top layer insulation cores with white binding
2-Bottom layer insulation cores with black binding
8-Velcro strips to attach and secure core layers
|
STEP 1
BOTTOM LAYER Lay the bottom layer flat. Open the bottom layer using webbing tabs. |
|
|
|
STEP 2
When using 2 insulated cores, use velcro strips to attach core layers together. |
|
|
STEP 3
Insert desired number (1 or 2) layers of insulated core into bottom layer |
|
|
STEP 4
Inside bottom layer, attach velcro at each corner to secure core layer(s) |
|
STEP 5
TOP LAYER Repeat Steps 1-5 |
|
STEP 6
Install disposable liner White sides toward the patient. Arrows pointing towards the hood. T-Top layer liner B-Bottom layer liner |
|
|
STEP 7
Secure velcro at foot of patient wrap. Secure velcro along each side of patient wrap.
Secure velcro at foot of patient wrap. Secure velcro along each side of patient wrap.
|
|
|
STEP 8
With top layer and bottom layer with white sides of disposable liner showing, flip top layer onto bottom layer.
With top layer and bottom layer with white sides of disposable liner showing, flip top layer onto bottom layer.
|
|
|
STORAGE
Roll half width or full width and secure with attached retention buckles. CARRY HANDLES LOCATED ON THE UNDERNEATH OF THE BOTTOM LAYER FOR EASY LIFTING |
|
