• HOME
  • ABOUT
  • CONTACT
  • BUY NOW
PARLEE MANUFACTURING
  • HOME
  • ABOUT
  • CONTACT
  • BUY NOW

ADD-ONS & COMPONENTS

With Parlee gear, you will find your options and configurations are limitless.
  • PVC MODULES
  • TASK ROLL
  • ORGANIZER POCKETS
  • ORGANIZER POUCHES
<
>
The following Integrated PVC Modules are designed to fit into all of our VIP Systems with hook and loop fasteners. Allows optimum customization to meet your needs and equipment. 

Small, Medium, Large, and Zippered Bag Modules are padded with closed cell foam and lined with velcro sensitive material.

While these have been designed for our VIP System, these can be use
 The following Integrated PVC Modules are designed to fit into all of our VIP Systems with hook and loop fasteners. Allows optimum customization to meet your needs and equipment.
​

While these have been designed for our VIP System, these can be used to enhance your existing bags.

Options:
Small 15.25 cm x 15.25 cm x 15.25 cm (6 in x 6 in x 6 in)
Medium 10 cm x 15.25 cm x 30.25 cm (4 in x 6 in x 12 in)
Large 15.25 cm x 15.25 cm x 30.50 (6 in x 6 in x 12 in)
Zippered Bag 7.50 cm x 15.25 cm x 35.50 cm (3 in x 6 in x 14 in)

Zippered Pouch 30.25 cm x 20.25 cm (12 in x 8 in)
With the task roll, customization and configuration options are limitless.
​
It is constructed of 400d Ripstop nylon lined with velcro sensitive loop. 

Any combination of our pocket, pouch and anchor modules can be incorporated in this unit to address you unique needs. The module rolls neatly away for storage in your pack holding the contents securely. Keep it rolled for carrying; it will hook onto a belt, IV pole, or other items as the need dictates. Unroll and lay it flat to access your gear.

Size (unrolled) 
49.50 cm x 32 cm 
19.50 in x 12.50 in

Identify the contents of your Task Roll modules at a glance with quick attach colour flash. Sold separately as a set of 4.
The following Integrated Organizer Pockets are designed to fit into all of our VIP Systems with hook and loop fasteners. Allows optimum customization to meet your needs and equipment.

While these have been designed for our VIP System, these can be used to enhance your existing bags. Our zippered organizer pockets are constructed of 400D nylon with clear panels to allow you to easily see the contents in each pocket.

Ready to adhere anywhere in your pack. Perfect for all your less bulky items.

Available in: Red, Blue, Yellow

​
​Sizes
​Small 15.25 cm x 14 cm (6 in x 5.5 in)
​Medium 20.25 cm x 14 cm (8 in x 5.5 in)
​Large 30.25 cm x 14 cm (12 in x 5.5 in)
Our organizer pouches are constructed of 400D nylon with clear panels to allow you to easily see the contents in each pouch.
Deeper than our pockets, are made for thicker items and feature a hook and loop-secured flap. Ready to adhere anywhere in your pack.

Available in: Red, Blue, Yellow

Sizes
Extra Small 7.50 cm x 10 cm (3 in x 4 in)
Small 10 cm x 10 cm x 2 cm (4 in x 4 in x .75 in)
​Medium 20.25 cm x 15.25 cm x 5 cm (8 in x 6 in x 2 in)
​Large 30.50 cm x 15.25 cm x 5 cm (12 in x 6 in x 2 in)
  • ANCHORS
  • ADD-ONS & REPLACEMENTS
  • SKID PLATES
  • DIVIDERS & FLAP POCKETS
<
>
The following Anchors are designed to fit into all of our VIPs with hook and loop fasteners, providing optimum customization to your needs and equipment. Although these have been designed for our VIP System, these can be used in your existing bags.

Vial Holder (five loops)
Triple Loop Anchor
Six Loop Anchor
Single Loop Elastic Anchor
Shock Cord Adjustable Anchor 2 in x 4 in
Shock Cord Hook Anchor 
1 in x 4 in
Shock Cord Hook Anchor 1 in x 5.5 in
REPLACEMENT REFLECTIVE STRIPS Replace worn reflective strips on your VIP System to give it a fresh new appearance.
​
SERVICE PATCH HOLDER Clear pocket to hold your agency's service patch for quick identification.

HIP BELT HOLSTER Keep your hip belt straps out of the way when they aren't needed.

ID HOLDER Label top and front pockets on VIP System 2 in x 4 in with velcro
Our replaceable 18 oz PVC skid plates are designed to take the majority of wear thereby extending the life of your VIP System. When excessive wear begins to show on the skid plate, it should be replaced promptly to prevent damage to the pack. Available for each size of VIP System & First In Pack
These movable dividers are designed to assist you in segmenting the interior of your VIP System main pack. As with all of the VIP System components, these allow you to truly create a custom fit for your unique needs.

VIP FRONT & TOP POCKET DIVIDERS Designed to separate and organize items in the VIP System Pockets. 400d nylon.

VIP PACK DIVIDERS These expandable dividers are designed to separate and organize items in the VIP System. A covering of velcro sensitive material allows any VIP Anchor or organizer component to be easily and securely attached. Sizes: Small & Large
​
FLAP POCKET The clear vinyl VIP Flap Pocket attaches to the inside of the main pack flap and provides easy access and visibility. It's ideal for documentation. Constructed of 18 oz PVC with a clear vinyl front for viewing enclosed documents.

INTUBATION FLAP
This component can attach to any pocket or interior pack surface of our VIP System to secure laryngoscope blades in their elastic loops.
CLICK HERE TO GET A QUOTE For Volume Pricing
BUY NOW


​ABOUT US

LIFETIME GUARANTEE

EMERGENCY PRODUCT CATALOGUE

​ADVENTURE PRODUCT CATALOGUE

JOIN THE TEAM

Get THE LATEST ON PRODUCTS, NEWS, PROMOTIONS & MORE

​4001 Lighthouse Route, Hwy 3 
PO BOX 192, Brooklyn
​Nova Scotia, B0J 1H0
info@parleemanufacturing.com
1 902 354 2268
Picture

A PROUD MEMBER OF

Picture

COPYRIGHT® PARLEE MANUFACTURING 2023.
  • HOME
  • ABOUT
  • CONTACT
  • BUY NOW